Yessenia Díaz Sánchez
Orocovis
Summary
Industrial Engineer with expertise utilizing process & continuous improvement experience to ensure and achieve companies/clients’ expectations. Advanced data and statistical analysis skills. Experienced in construction & infrastructure design. Strong leadership, teamwork, negotiation and persuasion abilities. Fluent in both English and Spanish.
Overview
11
11
years of professional experience
Work History
Quality Engineer
Collins Aerospace
07.2022 - Current
- Provide support to manufacturing operations and assure product is in quality compliance
- Evaluate and measure product materials discrepancies and non conformance
- Review current processes and procedures against actual practices and update/improve processes and procedures
- Evaluating and follow-up NCR actions effectiveness
- Create and review PFMEA for manufacturing and especial process
- Follow CAPA
- Document Investigation
- Assist with quality documentation approval
- Reviewing/ Approving NCRs Investigation & Disposition
- Investigating NCR, Quality Feedback and Complaints
- Train, evaluate and approve skills certification for new and exiting employees
- Support with the creation and reviewing rotors and diode training material
- Create and update quality alerts
- Discuss the quality topic with the operators in tier 1 meeting
- Monitoring and analyzing quality performance (ppm), to identify opportunities to improve and reduce defects
- Conduct Gemba/ RTPR & Layer Process Audit ( LPA)
- Support new product( new rotordesing project) project ensure is in compliance with quality requirements
- As part of non-conforming product investigations, I interact and maintain communication with internal and external customers and suppliers, through periodic meetings as required by each assembly
Sr. Industrial Engineer
Pratt & Whitney
12.2021 - 06.2022
- Lead the implementation of lean tools
- Lead continuous improvement to the manual deburr process focus on reduce the time standard and reducing safety incidents
- Perform process time studies and review time standard in solumina system
- Assist with the Lean Assessment
- Perform written and statistical presentation
- Review time standard process
- Create and update SoP’s
Lean Specialist
Walgreens DC
04.2021 - 11.2021
- Lead the implementation of lean tools in the Distribution Center
- Evaluate all continues improvement plan (Capital projects)
- Provide training to LC and other Team Members on the lean tools
- Perform process time studies
- Assist with the Lean Assessment
- Perform written and statistical presentation
- Update lean communication board
- Support internal audit
- Create and update SoP’s
- Create and update Process Map
Learning Specialist
Bristol Myers
08.2020 - 01.2021
- Reporting to the Development department (Training department), work with continuous improvement
- Design regulatory training process needed at the plant(test, study guides, presentations materials)
- Identifies and updates operators learning plans for qualifications tasks, to ensure systematic approach an compliances
- Preform On the Job Training procedure (OJT) and Skill Assessment (SAC) for the diversity of areas
- Review work instruction procedures
- Create and update learning material in the Learning Management System (LMS)
- Create and update training matrix
- Gather and analyze activities and improve head count by the implementation of a measurement tool created using excel data validations, pivot tables, dynamic dashboard, etc
- Support the production operations with the Corrective Action and Preventive Action (CaPa)
Specialist Manufacturing
AMGEN
02.2020 - 08.2020
- Reporting to the Development department (Training department), work with continuous improvement
- Study and analyze issues associated with the training process for identifying opportunities for improve
- Create and update Process Map and/ or Process Flow
- Data gathering and analysis (create dashboards, pivot tables, training reports, and others)
- Update the training matrix
- Conduct time study for identify opportunities for improvement
- Update Standard operation procedures
- Support the training team
Engineer III(OpEx)
Baxter
08.2019 - 11.2019
- Reporting to the OPEX department, work directly with continuous improvement and lean implementation in a manufacturing environment Implementing lean and lean six sigma tools such as: 5S, Kaizen, Kanban, A3, Problem solving, Standard Work and visual management, lean material flow (LMF), and others
- Study and analyze issues associated with the development of improved efficiency and productivity
- Create and update Process Map and/ or Process Flow
- Support with EMR's and changes control and other documentation process
- Provide Training in lean tools & CI
- Create and update Standard operation procedures and visual aid
- Support Engineering Department, production and other areas requested
- Support capital and new projects implementation
Manufacturing Engineer
Collins Aerospace
11.2018 - 07.2019
- Lead the implementation of new process
- Coordinate the development of a general strategy for manufacturing for the programs assigned in terms of cost, quality, process and delivery during proposal and or early program introduction stages
- Lead transition activities of hardware builds between plant sites
- Review SOP’s/JOT’s
- Preparing Rework Protocols for NCRs
- Coordinate activities between Electronics Ops, Engineering and Enterprises
- Lead and support process improvement and/or corrective actions initiatives
- Support quality department with the Corrective Action and Preventive Action (CaPa), also support with the Non-conformance product report
- Evaluate process and product the meet with client’s expectation by providing clear instruction and procedures (rework, out of process, standard procedures JIS and others) to perform best quality process
Process Engineer
HUDSON TECHNOLOGIES
07.2017 - 02.2018
- Lead capacity and facilities planning project to support company growth
- Design and implement changes to layout, process flow, standard work, new tools and equipment installation
- Assist in maintaining and enhancing continuous improvement processes
- Analyze employees’ productivity & efficiency, at the same time analyze the Overall Equipment Efficiency (OEE)
- Some of this project was identify as part of the capacity and facilities planning
- Implement new process and tools focused on cycle time, lead time, and change over and scrap reduction
- Support quality department with the design of Experiment (DoE) for HPD product
- Validate equipment through the Factory Acceptance Test/ Site Acceptance Test (FAT/SAT) method
- Develop pre- and post-production estimates, and cost effects of design changes, by identifying new manufacturing processes, cost quotes and document control
- Analyze and establish accurate setup time and run rates, updating routers with accurate information
Industrial Engineer - Lean Process Specialist
DONALDSON DISTRIBUTION CENTER
10.2016 - 05.2017
- Lead Continuous Improvement using lean tools such as: 5S, Kaizen, VSM, 3P, Kanban, Standard Work, Continuous Flow and others
- Lead CI boards, meetings & reports
- Conduct time study for improving efficiency & productivity
- Lead & conduct 6S audit (train managers, supervisors in 6S audit, track the 6S audit schedule & action plan)
- Conduct review & follow-up action for Donaldson Production System (DPS) Assessment
- Support capital project implementation
- Validate Standard Operation Procedures (SOP)
- Trained employees with the use of lean tools
- Update plant layout and blueprints
Associate Manufacturing Engineer – Lean Engineer Technician
EATON POWER BUSINESS
09.2013 - 09.2016
- Reporting to the OPEX department, work directly with continuous improvement and lean implementation in a manufacturing environment
- Implementing lean and lean six sigma tools such as: 5S, Kaizen, TPM, PM’s, VSM, Kanban, Set up reduction, Standard Work, Single Minute Exchange of Die (SMED), Lean Material Flow (LMF), and others
- Study and analyze issues associated with the development of improved efficiency and productivity
- Conduct time study, setup reduction, inventory reduction and internal audit such as 5S
- Perform written and statistical reports, including continuous improvement metrics report
- Validate & create standards such as Standard Operation Procedures (SOP), Check list & Visual Aids
- Update & create lay-out and blue print of the company
- Provide Training in CAD 2D, 3D, Lean tools & internal CI & 5S+ audit
- Support Engineering Department, production and other areas requested
- Conduct follow up action for Gemba Walk, Kaizen events, Lean Self-Assessment in all plants (assembly, punch press, plating, molding & warehouse)
- Provide support to the MESH Department, including documentation, presentations, Job Safety Analysis (JSA), and others
- Support capital project implementation
- Conduct Internal Quality Audit
Education
Bachelor of Science Degree - Industrial Engineering
Caribbean University
Bayamon, PRAssociate Degree - Engineering Technology with an emphasis in Drafting
Caribbean University
Bayamon, PRSkills
- Alambra system
- SAP
- Solumina
- PFMEA
- Problem Solving
- Root cause analysis
- Fishbone diagram
- Supplier Input Process Output Customer (SIPOC)
- CAPA
- CDOCs
- Learning Management System (LMS)
- Success Factor
- SharePoint
- Microsoft Office 2003-2016
- Lean Manufacturing tools
- Lean Six Sigma method
- DMAIC
- Total Productive Maintenance (TPM)
- Preventive Maintenance (PM)
- Kanban
- 5S
- Standard Work (SW)
- Standard Operation Procedure (SOP)
- Set up reduction (SUR)
- Value Stream Map (VSM)
- Single Minute Exchange of Die (SMED)
- Lean Material Flow (LMF)
- Overall Equipment Effectiveness (OEE)
- Statistical and Data Analysis
- Design in Auto Cad (2D and 3D)
- Design of experiment (DoE)
- Factory Acceptance Test
- Site Acceptance Test
- FAT/SAT
- Minitab
- Simulation software
- Arena
- Witness
- Multisim
- Robocim
- Draft and Design in table
- Basic knowledge in electrical equipment
- Multimeter
- Oscilloscope
- Quality engineering tools
- Corrective and preventive actions
- Quality documentation
- Process mapping
- Root cause identification
- Quality management system
- Root-cause analysis
- Non-conforming material reports
- Quality processes
- Failure modes and effects analysis
- Inspection methods
- Corrective action planning
- Inspection processes
- Materials inspection
- Six sigma methodologies
- Non-conforming materials report
- SOP development
- Performance metrics
- ISO 9000 standards
- Critical thinking
- Non-conformance reports
- [Language] fluency
- Continuous improvement
- Engineering support
- Non-conformance processes
- Six sigma methodology
- Customer complaint handling
Languages
English
Spanish
Volunteer Experience
Collaborated in design of a Community Project in Las Acerolas Toa Alta 2010.
Timeline
Quality Engineer
Collins Aerospace
07.2022 - Current
Sr. Industrial Engineer
Pratt & Whitney
12.2021 - 06.2022
Lean Specialist
Walgreens DC
04.2021 - 11.2021
Learning Specialist
Bristol Myers
08.2020 - 01.2021
Specialist Manufacturing
AMGEN
02.2020 - 08.2020
Engineer III(OpEx)
Baxter
08.2019 - 11.2019
Manufacturing Engineer
Collins Aerospace
11.2018 - 07.2019
Process Engineer
HUDSON TECHNOLOGIES
07.2017 - 02.2018
Industrial Engineer - Lean Process Specialist
DONALDSON DISTRIBUTION CENTER
10.2016 - 05.2017
Associate Manufacturing Engineer – Lean Engineer Technician
EATON POWER BUSINESS
09.2013 - 09.2016
Bachelor of Science Degree - Industrial Engineering
Caribbean University
Associate Degree - Engineering Technology with an emphasis in Drafting
Caribbean University
Similar Profiles
Roslene A. ManipisRoslene A. Manipis
Engineering Supervisor - Galleys at RAYTHEON TECHNOLOGIES Former Collins Aerospace , Rockwell Collins and B/E AerospaceEngineering Supervisor - Galleys at RAYTHEON TECHNOLOGIES Former Collins Aerospace , Rockwell Collins and B/E Aerospace
Steven LudwigSteven Ludwig
Senior Test Engineering Technician at Collins Aerospace/UTC Aerospace SystemsSenior Test Engineering Technician at Collins Aerospace/UTC Aerospace Systems
Krystin AliKrystin Ali
Engineering Project Assistant at Collins AerospaceEngineering Project Assistant at Collins Aerospace